The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Daytona Centauro MGS-01 All Categories

Sort by Title

Sort by Price

Page 33 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Hepco and Becker Junior Pannier And Top Box Lock

LUA70104 Universal Part

Replacement lock for Hepco and Becker Junior panniers and top boxes / top cases. This is the lock at the top of the panniers. Also used as the closing lock on Junior top boxes LUA61040 and LUA61045

Supplied with key, rivets and fitting instructions

part in stock 2 in stock

£43.00

INC VAT

£35.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Brake Caliper Overhaul Kit Brembo Goldline P30/34

BRA19723 Fits Nevada 750 (2003-2016), V7 I ALL, V7 II ALL, V7 III ALL, Breva ALL, Griso 1100, Norge ALL, Cali Vintage, Cali EV (1997-2009), Cali Sport (2001-2003), 1200 Sport, V11 Sport, Daytona, 1100 Sport, Cali Jackal, Cali Stone

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

part in stock 2 in stock

£34.00

INC VAT

£28.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Injection Decal

SBA31510 Fits Daytona

Dimensions:
216 x 22mm

One fairing decal

part in stock 2 in stock

30922500 GU30922500 30 92 25 00
3092 2500 3092.2500 30.92.25.00

£8.40

INC VAT

£7.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Plug Cap

ELA02450 Fits V7 Stone (2012-), V7 Special (2012-2013), V7 Racer (2012-), MGS-01, Nevada 750 (2009-2016), V7 II ALL

Spark plug cap for single throttle body models

Also known as suppressor cap Guzzi ref 2D000005 and 2D000247

part in stock 2 in stock

02717450 GU02717450 02 71 74 50
0271 7450 0271.7450 02.71.74.50

£15.00

INC VAT

£12.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Suspension Bearing

SUA81066 Fits Bellagio, Breva 850, Breva 1100, Breva 1200, Griso 1100, Griso 1200, MGS-01, Norge ALL, 1200 Sport, Stelvio

Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike

See SUA81068 for bearing oil seal

part in stock 2 in stock

AP8110066

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Sump Gauze Filter

ENA14152 Fits 850/1000 ALL Models, 1100 Sport ALL, Bellagio, Quota 1100, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Daytona 1000

Gauze sump filter, retained by ENA95006

part in stock 2 in stock

14152200 GU14152200 14 15 22 00
1415 2200 1415.2200 14.15.22.00

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

4 Pin 2 x 2 Female Block Connector

ELA20075 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport

4 pin female block connector arranged in two rows of two used for main loom connections. See ELA17603 for the Molex connectors that go in this block. Use male molex connectors with this blockv

part in stock 2 in stock

£2.30

INC VAT

£1.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Rubber Spacer

FRA66415 Fits 750 X, Breva 750, Daytona ALL, NTX 350, NTX 650, 1100 Sport ALL, Centauro, V11 Sport ALL, V7 Cafe, V7 Classic, V7 Racer, V7 Special, V7 Stone

Dimensions:
9mm ID x 35mm OD x 16mm

Rubber spacer, used for tank mounting/locating rubber on some models

2 required per bike. Includes internal metal bush

part in stock 2 in stock

66103415 GU66103415 66 10 34 15
6610 3415 6610.3415 66.10.34.15

£11.68

INC VAT

£9.73 EX VAT this is the price you will pay if you are ordering from outside the UK

Rubber Mount Anti Vibration Silentblock

FRA30600 Fits Daytona ALL, 1100 Sport ALL

Dimensions:
M5 x 15mm stud, 20mm x 13mm OD bush

Silent block rubber used for instrument support

4 of these used to mount instruments

part in stock 2 in stock

30503600-Z

£6.00

INC VAT

£5.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M8 Bleed Nipple

BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone

Dimensions:
M8 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.
2 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 33 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33